Fiber proof testers are designed to apply a set load to Optical Fiber Coloring Machine in order to test the potency of the spliced fiber. Our fiber proof testers can be purchased in both linear and rotary designs, for both proof and stress testing. Fiber proof testers are accessible for solitary setting, multimode, and polarization-maintaining fibers. Pick from devoted, standalone techniques or multi-purpose designs that are also able to stripping, cleaning, cleaving, splicing, and recoating.
Fiber Recoaters with Evidence Testers offer easy, incorporated solutions to recoat and check fusion-spliced fibers. The fiber recoating process restores the buffer covering to your stripped fiber, providing more flexibility when compared to a heat-reduce safety sleeve, enabling that it is handled and coiled with no damage to the fusion-spliced area. The integrated linear or rotary proof tester allows customers to right away test a recoated fiber having a pre-decided load and figure out the long-phrase longevity of the fiber. Because of the capacity to restore a combination-spliced fiber to close to original condition, these systems are perfect for applications including undersea optical fiber cables, submarine communication wiring, fiber lasers, or Dispersed Bragg Reflector (DBR) lasers.
The process starts off with the fusion-spliced part of fiber being placed in the middle of the mold set up (see picture to the right). As soon as set in place, inserts within the fiber blocks secure the Sheathing Line in position. Recoat material is pumped in to the cavity then UV-treated. The recoated fiber can then be tested by tugging onto it as much as a pre-determined weight.
Recoater and Mold Assembly Options – Recoaters can be purchased with either an automated or handbook mold assembly. The automatic mold set up features pneumatic control over the mold dishes and is enhanced for high-volume production applications. Handbook mold assemblies, on the other hand, use easy-to-open mold dishes that offer more flexibility and are perfect for low-volume production or R&D programs. An automatic or manual volumetric dispensing pump and injection system is used to inject the recoat material into the mold cavity.
The PTR208 automatic recoater comes standard using a mold assembly for Ø430 µm coated fibers; For your handbook recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly comes separately in order that clients can pick the right mold coating size for application. Custom mold covering sizes can be purchased as much as Ø900 µm. Pre-installing of the mold set up in the manufacturer is additionally available. Contact Tech Support for more information on custom molds or factory set up.
We offer each higher-directory (Item # AB950200) and low-index (Product # PC373) recoat materials to use during these recoaters. Recoaters with manual injection pumping systems (Item #s PTR206B and PTR307B) are compatible with both types of recoat materials; all the other recoaters are appropriate for the top-index materials only. Our manual recoaters having an automated shot system (Product #s PTR206 and PTR307) can be personalized to work with both the reduced- and-directory recoat materials; make sure you contact Technology Assistance for additional information.
Evidence Tester Options – The PTR206, PTR206B, and PTR208 Fiber Recoaters have an incorporated linear proof tester, that can take the fiber up to a predetermined load (20 N) and then produces it. The linear evidence tester utilizes the same Sheathing Line since the recoater and therefore the fiber fails to have to be moved prior to screening. The PTR307 and PTR307B Fiber Recoaters have a built-in rotary evidence tester, which can carry out both proof and tension assessments (?89 N). A single set of proof test grips is included; substitute proof test grips can be purchased below in packs of 10. Every testing process is completely automated through the provided handset or tablet controller, enabling kqkbws user to choose guidelines such as the weight, the speed where the load is used, and the hold time.
Inserts for Fiber Keeping Blocks – As well as the above, we provide a variety of inserts for use inside the fiber holding blocks of the recoaters in order to support a wide range of fiber coating diameters. For recoaters having a rotary evidence tester, the inserts are appropriate for fiber coating diameters in a range from 125 µm to 900 µm. For recoaters using a linear proof tester, the inserts cover a range for fiber coatings from Ø250 µm to Ø900 µm.